2018-2022 Toyota Camry 2.5L 8 Speed Automatic Transmission JDM A25A-FKS

Stock number TOY-TR-A25A-004

In stock, ships from Grand Rapids

Stock number	TOY-TR-A25A-004
Make	Toyota
Engine code	A25A
Fits model years	2018-2022
Category	Automatic Transmissions, Transmissions
Shipping weight	150 lbs (estimated)
Condition	Used, imported from Japan, tested before dispatch
Warranty	90 days from delivery

Prefer to write it down? Call +1 503-551-4892 or email Sales@hanedaautos.com.

This ships by freight. It travels bolted to a pallet, and the price depends on your ZIP, whether the address is residential and whether you need a liftgate. Order online and we will send the freight price before anything leaves the floor, or get the price up front below.

Checking fitment? Call +1 503-551-4892 or email Sales@hanedaautos.com with your VIN and we will confirm it against this unit.

About this unit

Feature	Detail
Transmission Model	UA80E (Direct Shift-8AT)
Engine Compatibility	2.5L A25A-FKS (Dynamic Force)
Speeds	8-Speed Automatic
Drive Type	Front-Wheel Drive (FWD)
Fluid Type	Toyota Genuine ATF WS
Origin	JDM (Japanese Domestic Market)

Vehicle Fitment

This transmission is a direct replacement for the Eighth Generation (XV70) Toyota Camry equipped with the 2.5L engine:

Model Years: 2018, 2019, 2020, 2021, 2022
Trims: L, LE, SE, XLE, XSE (Non-Hybrid Models)
Compatibility Note: This unit is for Gasoline models only. It is not compatible with V6 (UA80G) or Hybrid (eCVT) drivetrains.

JDM to USDM Installation & Swap Guide

The UA80E 8-speed is a highly computerized transmission. To ensure a seamless “Plug-and-Play” installation into a USDM Camry, professional installers must follow these steps:

Sensor Transfer: You must swap your original USDM Input and Output Speed Sensors from your old transmission to the JDM unit. This ensures the USDM TCM (Transmission Control Module) receives accurate data.
Neutral Safety Switch: Transfer your original USDM Neutral Safety Switch (Range Sensor) to the JDM unit to ensure the shift linkage aligns perfectly with your cabin selector.
Wiring Harness: Always reuse your original USDM transmission wiring harness. JDM harnesses are configured for right-hand drive and may have different pinouts that could trigger a Check Engine Light.
Cooler Maintenance: Thoroughly flush the transmission cooler lines and radiator before installation. Contamination from the previous unit is the #1 cause of replacement transmission failure.
TCM Reset: After installation, we highly recommend performing a “Transmission Adaptive Learning” reset using a professional scan tool (Toyota Techstream) to calibrate the new unit to your driving style.
Fluid Fill: Use only Toyota ATF WS. Check the fluid level at the exact operating temperature as specified in the factory service manual.

Tags:

2018-2022 Toyota Camry Transmission, JDM 2.5L Transmission, A25A-FKS Automatic Transmission, UB80E Transmission, Toyota Camry Gearbox, 2018 Camry Transmission, 2019 Camry Transmission, 2020 Camry Transmission, 2021 Camry Transmission, 2022 Camry Transmission, Low Mileage JDM, 8-Speed Automatic, FWD Transmission, A25A FKS Replacement, Tested JDM Parts, Direct Shift 8AT, Imported Japanese Transmission, Camry XV70 Transmission

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

Confirm the engine code against your own vehicle, not just the model year.
Japanese market units can differ from the US version in intake, loom and sensors.
Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
Keep your original accessories until the swap is finished and running.