Skip to content
Used engines, transmissions and Harley-Davidson motorcycles shipped nationwide. 90 day warranty. +1 503-551-4892  ·  Sales@hanedaautos.com  ·  Grand Rapids, Michigan
2007-2008 Infiniti G35 3.5L V6 Dual Intake Engine JDM VQ35HR

2007-2008 Infiniti G35 3.5L V6 Dual Intake Engine JDM VQ35HR

Stock number NIS-EN-VQ35HR-001

$1,699.99

In stock, ships from Grand Rapids

Stock numberNIS-EN-VQ35HR-001
MakeNissan
Engine codeVQ35HR
Fits model years2007-2008
CategoryEngines, Infiniti Engines
Shipping weight420 lbs (estimated)
ConditionUsed, imported from Japan, tested before dispatch
Warranty90 days from delivery

Prefer to write it down? Call +1 503-551-4892 or email Sales@hanedaautos.com.

Get a freight price first

This ships by freight. It travels bolted to a pallet, and the price depends on your ZIP, whether the address is residential and whether you need a liftgate. Order online and we will send the freight price before anything leaves the floor, or get the price up front below.

Checking fitment? Call +1 503-551-4892 or email Sales@hanedaautos.com with your VIN and we will confirm it against this unit.

About this unit

FeatureDetail
Engine CodeVQ35HR (High Response)
Displacement3.5 Liter
Configuration60-Degree V6
Valve TrainDOHC 24-Valve Dual VVT-i
InductionDual Throttle Body / Dual Intake
HorsepowerApprox. 306 hp
Redline7,500 RPM

Vehicle Fitment

This engine is a direct long-block replacement for the following North American models:

  • Infiniti G35 Sedan: 2007, 2008 (V36 Chassis Only)

  • Nissan 350Z: 2007, 2008 (HR Models)

  • Infiniti EX35: 2008–2012

  • Infiniti FX35: 2009–2012

  • Compatibility Note: This is the Dual Intake HR model. It is not compatible with 2003–2006 G35 Sedans or 2003–2007 G35 Coupes equipped with the VQ35DE single-intake engine.

JDM to USDM Installation & Swap Guide

To ensure 100% compatibility and maintain your Infiniti’s sophisticated electronics, professional technicians recommend the following “External Swap” steps:

  1. Wiring Harness: Always retain and use your original USDM Infiniti Engine Wiring Harness. JDM harnesses are configured for right-hand drive and will not interface with your G35’s chassis computer or battery location.

  2. Intake & Exhaust Manifolds: While the JDM dual-intake plenums are usually identical, we recommend transferring your original USDM Exhaust Manifolds to ensure all oxygen sensor (AFR) bungs align perfectly with your North American catalytic converters.

  3. Engine Sensors: Transfer your original USDM Camshaft and Crankshaft Sensors to the JDM block. Nissan/Infiniti sensors are highly sensitive; using your original “known-good” sensors prevents intermittent signal issues or CEL codes.

  4. AWD vs. RWD Note: If your G35 is a G35x (AWD), you must transfer your original USDM AWD Oil Pan and Pickup Tube to clear the front differential and axles.

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

  • Confirm the engine code against your own vehicle, not just the model year.
  • Japanese market units can differ from the US version in intake, loom and sensors.
  • Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
  • Keep your original accessories until the swap is finished and running.

Others that fit a similar job

All nissan engines
Scroll to Top