Skip to content
Used engines, transmissions and Harley-Davidson motorcycles shipped nationwide. 90 day warranty. +1 503-551-4892  ·  Sales@hanedaautos.com  ·  Grand Rapids, Michigan
2007-2015 Lexus RX350 3.5L V6 DOHC Engine JDM 2GR-FE

2007-2015 Lexus RX350 3.5L V6 DOHC Engine JDM 2GR-FE

Stock number TOY-EN-2GRFE-004

$1,549.99

In stock, ships from Grand Rapids

Stock numberTOY-EN-2GRFE-004
MakeToyota
Engine code2GR-FE
Fits model years2007-2015
CategoryEngines, Lexus Engines
Shipping weight420 lbs (estimated)
ConditionUsed, imported from Japan, tested before dispatch
Warranty90 days from delivery

Prefer to write it down? Call +1 503-551-4892 or email Sales@hanedaautos.com.

Get a freight price first

This ships by freight. It travels bolted to a pallet, and the price depends on your ZIP, whether the address is residential and whether you need a liftgate. Order online and we will send the freight price before anything leaves the floor, or get the price up front below.

Checking fitment? Call +1 503-551-4892 or email Sales@hanedaautos.com with your VIN and we will confirm it against this unit.

About this unit

FeatureDetail
Engine Code2GR-FE (JDM Version)
Displacement3.5 Liter
Configuration60-Degree V6
Valve TrainDOHC 24-Valve Dual VVT-i
Block MaterialAluminum Alloy
HorsepowerApprox. 270–275 hp
Torque248 lb-ft @ 4700 RPM

Vehicle Fitment

This engine is a direct long-block replacement for the following North American models:

  • Lexus RX350: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

  • Toyota Highlander V6: 2008–2016

  • Toyota Sienna: 2007–2016

  • Toyota Camry V6: 2007–2017

  • Lexus ES350: 2007–2018

  • Compatibility Note: This is the Front-Wheel Drive (FWD) / All-Wheel Drive (AWD) transverse configuration 2GR-FE. It is not compatible with Rear-Wheel Drive (RWD) models like the IS350 or GS350 without extensive modifications.

JDM to USDM Installation & Swap Guide

To ensure 100% compatibility and maintain the sophisticated electronics of your RX350, professional technicians recommend the following “External Swap” steps:

  1. Intake & Exhaust Manifolds: You must transfer your original USDM Intake Manifold and Exhaust Manifolds. JDM versions often differ in vacuum port layouts and lack specific emissions bungs required for North American OBDII compliance.

  2. Wiring Harness: Always retain and use your original USDM Engine Wiring Harness. JDM harnesses are configured for right-hand drive and will not interface with your Lexus’s chassis bulkheads or fuse box.

  3. Engine Sensors: Transfer your original USDM Camshaft and Crankshaft Sensors. Lexus electronics are highly sensitive; using your original “known-good” sensors prevents intermittent signal issues or Check Engine Light codes.

  4. Oil Pan & Pickup: Inspect the JDM oil pan. Depending on the donor vehicle (e.g., Toyota Estima or Alphard), you must transfer your original USDM RX350 Oil Pan and Pickup Tube to ensure proper subframe and AWD transfer case clearance.

  5. Water Housing: Swap your original USDM Water Outlet and Thermostat Housing to ensure all radiator and heater hoses align perfectly with your North American cooling system.

  6. Oil Cooler: Please keep in mind that some JDM 2GR-FE do not come with the oil cooler.

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

  • Confirm the engine code against your own vehicle, not just the model year.
  • Japanese market units can differ from the US version in intake, loom and sensors.
  • Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
  • Keep your original accessories until the swap is finished and running.

Others that fit a similar job

All toyota engines
Scroll to Top