Skip to content
Used engines, transmissions and Harley-Davidson motorcycles shipped nationwide. 90 day warranty. +1 503-551-4892  ·  Sales@hanedaautos.com  ·  Grand Rapids, Michigan
2009-2012 Toyota RAV4 2.5L Engine JDM 2AR-FE PZEV ULEV II Compatible

2009-2012 Toyota RAV4 2.5L Engine JDM 2AR-FE PZEV ULEV II Compatible

Stock number TOY-EN-2ARFE-001

$1,999.99

In stock, ships from Grand Rapids

Stock numberTOY-EN-2ARFE-001
MakeToyota
Engine code2AR-FE
Fits model years2009-2012
CategoryEngines, Toyota Engines
Shipping weight280 lbs (estimated)
ConditionUsed, imported from Japan, tested before dispatch
Warranty90 days from delivery

Prefer to write it down? Call +1 503-551-4892 or email Sales@hanedaautos.com.

Get a freight price first

This ships by freight. It travels bolted to a pallet, and the price depends on your ZIP, whether the address is residential and whether you need a liftgate. Order online and we will send the freight price before anything leaves the floor, or get the price up front below.

Checking fitment? Call +1 503-551-4892 or email Sales@hanedaautos.com with your VIN and we will confirm it against this unit.

About this unit

FeatureDetail
Engine Code2AR-FE
Displacement2.5 Liter
ConfigurationInline 4-Cylinder (DOHC)
Compression Ratio10.4:1
HorsepowerApprox. 179 hp @ 6000 RPM
Torque172 lb-ft @ 4100 RPM
Fuel SystemSequential Multi-port Fuel Injection

Vehicle Fitment

This engine is a direct replacement for the following North American models:

  • Toyota RAV4: 2009, 2010, 2011, 2012 (Base, Sport, and Limited trims)

  • Emissions Compatibility: Fits both Federal and California (PZEV/ULEV II) emission standards.

  • Interchange Note: While the long block is identical, certain external accessories must be swapped from your original USDM engine.

JDM to USDM Installation Guide

When swapping a JDM 2AR-FE into a USDM (United States Domestic Market) Toyota RAV4, follow these essential steps to ensure 100% compatibility and no Check Engine Light (CEL):

  • Sensor Swap: Transfer your original USDM intake manifold, exhaust manifold, and all sensors (MAF, O2, etc.) to the JDM engine block.

  • EGR & Emissions: If your USDM RAV4 is equipped with specific PZEV/ULEV II smog equipment not present on the JDM long block, you must transfer those components to maintain emissions compliance.

  • Wiring Harness: Always use your original USDM wiring harness and ECU. The JDM harness is often cut or configured for right-hand drive vehicles and will not plug into your dash.

  • Coolant & Oil: Use the USDM water pump and thermostat housing if the JDM outlets differ in angle.

     

    • Pro Tip: Replace your water pump, thermostat, and spark plugs while the engine is out of the vehicle to save on future labor costs.

TAGS:

2009-2012 Toyota RAV4 Engine, JDM 2AR-FE, 2.5L Toyota Motor, PZEV RAV4 Engine, ULEV II Engine, 2ARFE Replacement, 2009 RAV4 Engine, 2010 RAV4 Engine, 2011 RAV4 Engine, 2012 RAV4 Engine, Low Mileage JDM, Imported Toyota Engine, 2.5L 4-Cylinder, Dual VVT-i, Tested JDM Motor, RAV4 Engine Assembly, California Emissions Engine,

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

  • Confirm the engine code against your own vehicle, not just the model year.
  • Japanese market units can differ from the US version in intake, loom and sensors.
  • Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
  • Keep your original accessories until the swap is finished and running.

Others that fit a similar job

All toyota engines
Scroll to Top