1998-2000 Toyota Land Cruiser 4.5L Inline-6 DOHC 24V Coil Pack Engine JDM 1FZ-FE

About this unit

Vehicle Fitment

This engine is a direct replacement for the following North American models:

• Toyota Land Cruiser (UZJ100/FZJ100): 1998, 1999, 2000

• Lexus LX450: (Verify specific year/ignition crossover)

• Note: This is the Coil Pack version. If your vehicle has a Distributor, this engine can be used as a long block, but you must transfer your original ignition system and related components.

Installation & JDM Swap Notes

To ensure a successful installation into your 100-Series Land Cruiser:

1. Component Transfer: You must transfer your original US-spec intake manifold, exhaust manifold, and all external sensors to the JDM long block to ensure 100% compatibility with your wiring harness and ECU.

2. Ignition System: Confirm your vehicle uses the coil-on-plug setup. If swapping into an earlier model, you will need to reuse your original distributor and related drive gear.

3. Oil Pan: Depending on your specific chassis, you may need to swap your original oil pan and pickup tube to ensure proper fitment over the front differential.

4. Maintenance: While the engine is out, we highly recommend replacing the Front and Rear Main Seals, Water Pump, and Thermostat.

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

• Confirm the engine code against your own vehicle, not just the model year.
• Japanese market units can differ from the US version in intake, loom and sensors.
• Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
• Keep your original accessories until the swap is finished and running.