Skip to content
Used engines, transmissions and Harley-Davidson motorcycles shipped nationwide. 90 day warranty. +1 503-551-4892  ·  Sales@hanedaautos.com  ·  Grand Rapids, Michigan
2000-2004 Subaru Legacy 2.0L H4 SOHC Engine JDM EJ20 EJ203

2000-2004 Subaru Legacy 2.0L H4 SOHC Engine JDM EJ20 EJ203

Stock number SUB-EN-EJ20-001

$799.99

In stock, ships from Grand Rapids

Stock numberSUB-EN-EJ20-001
MakeSubaru
Engine codeEJ20
Fits model years2000-2004
CategoryEngines, Subaru Engines
Shipping weight280 lbs (estimated)
ConditionUsed, imported from Japan, tested before dispatch
Warranty90 days from delivery

Prefer to write it down? Call +1 503-551-4892 or email Sales@hanedaautos.com.

Get a freight price first

This ships by freight. It travels bolted to a pallet, and the price depends on your ZIP, whether the address is residential and whether you need a liftgate. Order online and we will send the freight price before anything leaves the floor, or get the price up front below.

Checking fitment? Call +1 503-551-4892 or email Sales@hanedaautos.com with your VIN and we will confirm it against this unit.

About this unit

FeatureDetail
Engine CodeEJ20 / EJ203 (JDM SOHC)
Displacement2.0 Liter
ConfigurationHorizontally Opposed (Flat-Four)
Valve TrainSOHC 16-Valve
Replacement ForUSDM 2.5L EJ251 / EJ253
HorsepowerApprox. 140–148 hp
Torque137 lb-ft @ 4400 RPM

Vehicle Fitment

This engine is the top-rated replacement engine for the following North American models:

  • Subaru Legacy (L, GT, Brighton): 2000, 2001, 2002, 2003, 2004

  • Subaru Outback (Base, Limited): 2000, 2001, 2002, 2003, 2004

  • Chassis Compatibility: BE (Sedan) and BH (Wagon) chassis.

  • Compatibility Note: This engine replaces the 2.5L SOHC. It is not a replacement for the 3.0L H6 or the 2.5L Turbo models.

JDM 2.0L to USDM 2.5L Swap Guide

To ensure 100% compatibility and a “first-turn” start using your original 2.5L ECU, professional Subaru technicians recommend the following “External Component Swap”:

  1. Crankshaft & Camshaft Sprockets: You must transfer your original USDM 2.5L Crankshaft Sprocket and Driver-Side Camshaft Sprocket. The timing “trigger” teeth on JDM engines differ; failing to swap these will result in a “No Start” condition as the ECU won’t recognize the signals.

  2. Intake Manifold: Transfer your original USDM 2.5L Intake Manifold onto the JDM 2.0L block. This ensures all vacuum lines, EGR configurations, and your wiring harness plug in perfectly without modification.

  3. Engine Sensors: Transfer your original USDM PCV Valve, Camshaft and Crankshaft Sensors to the JDM block.

  4. Wiring Harness: Always retain and use your original USDM Engine Wiring Harness. JDM harnesses are built for right-hand drive and will not interface with your Legacy’s chassis.

  5. Exhaust Manifolds: Swap your original USDM Exhaust Manifolds. JDM headers often lack the oxygen sensor bungs required for North American emissions compliance.

  6. Flexplate/Flywheel: Use your original USDM Flexplate (Automatic) or Flywheel (Manual) to ensure perfect starter engagement.

What is included

You receive exactly what is pictured. Engines are supplied as a long block assembly with the components visible in the photos. Accessories such as the alternator, starter, intake manifold or sensors are included only where you can see them on the unit, so check the photographs before ordering and ask us if anything is unclear.

Before you order

  • Confirm the engine code against your own vehicle, not just the model year.
  • Japanese market units can differ from the US version in intake, loom and sensors.
  • Replace the timing components, water pump and seals while the unit is out. It is cheap insurance on an engine this age.
  • Keep your original accessories until the swap is finished and running.

Others that fit a similar job

All subaru engines
Scroll to Top